Linear Programming-Based Power Management for a Multi-Feeder Ultra-Fast DC Charging Station

The growing number of electric vehicles (EVs) affects the national electricity system in terms of power demand and load variation. Turning our attention to Italy, the number of vehicles on the road is 39 million; this represents a major challenge, as they will need to be recharged constantly when the transition to electric technology is complete. If we consider that the average power is 55 GW and the installed system can produce 120 GW of peak power, we can calculate that with only 5% of vehicles in recharging mode, the power demand increases to 126 GW, which is approximately 140% of installed power. The integration of renewable energy sources will help the grid, but this solution is less useful for handling large load variations that negatively affect the grid. In addition, some vehicles committed to public utility must have a reduced stop time and can be considered to have higher priority. The introduction of priorities implies that the power absorption limit cannot be easily introduced by limiting the number of charging vehicles, but rather by computing the power flow that respects constraints and integrates renewable and local storage power contributions. The problem formulated in this manner does not have a unique solution; in this study, the linear programming method is used to optimise renewable resources, local storage, and EVs to mitigate their effects on the grid. Simulations are performed to verify the proposed method

Perspectives on Electric Machines with Cryogenic Cooling

Cryogenic cooling is a well-established and expanding technology. In the field of electric machines, it allows the construction of more efficient machines with a high power density. This paper addresses the main cooling technologies and their impact on cryogenic machine construction, providing perspective for their use in future electrical machines. Although cost and safety issues of cryogenic systems are still holding back the uptake of cryogenic electric motors and generators, research in this field should provide significant improvements and promote their use at different levels

RESTING CYSTS FROM COASTAL MARINE PLANKTON

Coastal plankton show fluctuations in abundance and species composition. Resting stage (cyst) production is a common strategy adopted by hundreds of plankton species to ensure reproduction and to avoid adverse conditions. During the resting period, these species are normally absent from the water column, and cysts produced in the plankton accumulate in the sediment where they wait for the return of suitable conditions. A portion of the cyst bank does not hatch, instead undergoing a dormancy that may extend for decades. Confined coastal areas accumulate cysts in sediment due to one or more possibilities, including reduced water movement/hydrodynamics, high population density, abundance of cyst-producing species, and the absence or scarcity of possible cyst consumers in the benthos. The pelagic-benthic nexus, which affects both the sediment and the water column (and possibly sea ice) is still poorly understood. In fact, the presence of cysts in the life cycle of organisms is likely to have considerable consequences for the ecology of coastal plankton, as well as the evolution and biogeography of species. This review aims to depict the presence (and even abundance) of resting stages in marine environments and their impact on ecosystem functioning. The review starts with a description of encysted resting stages in all marine planktonic taxa, listing a total of 501 species with known cysts, and methods and tools for their collection and study. The physiology and timing of the rest period is then described for various taxa, followed by a discussion of the evolutionary implications of resting. The presence of encysted stages in different realms and phyla of plankton suggests an ancient origin and a successive diversification of morphologies that, today, roughly characterise each taxa. Ecological and biogeographical implications stem from this general framework and support the hypothesis of seasonal occurrences of planktonic life in ecosystems where productivity is suspended for a long time (e.g. in polar seas). The potential to suspend or resume life has implications for human activities, such as the risk of translocations through ship ballast water and contamination of water and seafood with toxins but also the benefit of cysts for the production of aquaculture feed. The review concludes with perspectives on present knowledge and outstanding questions to address in future studies

Virtual gardening: Identifying problems and potential directions for 'ecological awareness' through soil management and plant recognition gaming

Games are increasingly proven to be effective learning tools through a multitude of methodologies and approaches and this is no different for issues relating to the environment and the place of humans within it. We collaborated with the Eden Project to create a mobile game addressing some concerns on the ecological awareness of visitors that they raised with us: a mobile garden management game with a plant recognition technology. Such a project proved a valuable opportunity to understand how a game for smart devices might promote short-term ecological awareness for a general audience. Using a research creation methodology, we analyse, document and run a limited empirical study through user experience testing on players to investigate if the game had an effect on their ecological awareness

Determination of inorganic phosphorus in serum: Evaluation of three methods applied to the Technicon RA-1000 analyzer

We have evaluated three analytical methods for determining inorganic phosphorus in serum applied to the Technicon RA-I000 analyzer: a fully enzymatic colorimetric method based on the specific system purine nucleoside phosphorylase/xanthine oxidase coupled to an indicator colorimetric reaction similar to the Trinder reaction; a chemical method involving the direct UV measurement of the phosphomolybdate complex; and a chemical method with reduction of the phosphomolybdate complex to molybdenum blue. Experiments were performed to assess within-run and between-day precision, linearity, interference and correlation. The best performance characteristics were shown by the enzymatic colorimetric method and the phosphomolybdate UV method

Development of DTT single null divertor scenario

Abstract This paper focuses on scrape-off layer and divertor modelling of the medium-density single-null scenario of the Divertor Test Tokamak facility (DTT), under construction in Italy. The modelling was performed using the 2D coupled fluid-Monte Carlo code SOLEDGE2D-EIRENE. For DTT pump designing, neutral pressure at the pump aperture below the dome is calculated in deuterium-only cases as well as with impurity seeding with various puffing levels. This scenario analysis also allowed the characterization of detachment in DTT and the influence of pumping on detachment itself. Two different radiating impurities, neon and nitrogen, were tested in the high power scenario to evaluate the minimum impurity concentration required to achieve sustainable conditions at DTT divertor. The sensitivity of the model was studied by varying the impurity concentration; the model shows a hysteresis-like behaviour between the impurity influx and the total impurity content by which detachment is strongly influenced

Reply to Comment on: Hawking radiation from ultrashort laser pulse filaments

A comment by R. Schutzhold et al. raises possible concerns and questions regarding recent measurements of analogue Hawking radiation. We briefly reply to the opinions expressed in the comment and sustain that the origin of the radiation may be understood in terms of Hawking emission

Development of smooth finishes in electrostatic fluidized bed (EFB) coating process of high-performance thermoplastic powders (PPA 571 H)

This paper deals with the analysis of the evolution of the surface morphology of metal substrates coated with high-performance thermoplastic powders, namely PPA 571 H, by using electrostatic fluidized bed (EFB) process. Attention has been particularly focused on the relationship between baking time and temperature of EFB coated substrates and the morphological characteristics of the resulting polymeric films. First, thermal behaviour of PPA 571 H polymeric powders was characterized by using standard calorimetric techniques. Accordingly, PPA 571 H melting kinetic was experimentally deduced. Based upon experimental findings, predictive analytical model was also developed and employed to trace 'iso-conversion' curves out. Second, metal substrates, made from low carbon steel (AISI 1040), were EFB coated and baked at several baking time and temperatures. Combined analyses of scanning electron and confocal microscopes were led to measure the evolution of the films surface morphology under different baking conditions. Accordingly, a relationship between film morphologies and melting degree was sought. Consistent trends of roughness parameters versus baking parameters were found, with smoother finishes of the polymeric films being achieved for higher degrees of melting, that is, for higher baking temperature and time. Full maps and related analytical models of the finishing levels according to baking parameters were also built up, hence providing first useful indications to powder coaters on how to best deal with their settings. © 2006 Elsevier B.V. All rights reserved

Abrasive fluidized bed finishing to improve the fatigue behaviour of Ti6Al4V parts fabricated by electron beam melting

A study of the abrasive fluidized bed (AFB) finishing process was conducted to quantify the obtainable improvement of the fatigue behaviour of Ti6Al4V parts produced by electron beam melting (EBM). Axial-symmetric EBM samples were rotated at high speed inside a fluidized bed of stainless-steel media. The effects of the treatment time and the rotational speed on morphological features and fatigue life of the EBM samples were investigated. Outcomes showed that the improvement in surface properties induced by the AFB finishing process determined an increase up to 50% in fatigue life and a shift of the S-N curve